Strengths of MPIL PEBs are :- Clear spans up to 100m without internal columns
- Flexibility in building dimensions
- ISO 9001 quality accreditation
- Easy expansion
- Fixed deadlines and costs
- Weather-tight roof and wall coverings with accessories for long
maintenance free exteriors
Advantages of MPIL PEBs are :
- Single source responsibility
- Low initial cost
- Engineering flexibility
- Faster overall project completion
- Low maintenance
- Fast modular expandability
MPIL PEBs include :
Primary structures: H/I BeamsH/I Beams in the PEB industry often refer to primary built-up members. Primary members consists of columns, rafters, beams etc. These are fabricated from high strength Gr. 50 HR plates. Plates are cut to size and shape. Built up sections a re-made form these plates in Automatic Beam Welding Line by submerged arc welding.
Secondary Members :
Secondary Members in the PEB industry refer mostly to longitudinal roof and wall members that are roll formed from galvanized coils. Secondary members used in a PEB include steel purlins, side runners, fascia channels, door posts, window posts, rafter stays, column stays base angles and other miscellaneous structural parts.
Secondary Members in the PEB industry refer mostly to longitudinal roof and wall members that are roll formed from galvanized coils. Secondary members used in a PEB include steel purlins, side runners, fascia channels, door posts, window posts, rafter stays, column stays base angles and other miscellaneous structural parts.
”Z” sections acting as longitudinal roof purlins and longitudinal wall girts that connect to columns & rafters and support exterior roof and wall panels.
"C” sections used primarily in framed openings and as a transition member between partial block walls and wall panels.
Base angles, gable angles, and mezzanine edge angles.
Roofing & Cladding SystemsMPIL PEBs offer you choice of 5 different types of roofing and cladding systems that enhance the aesthetic appeal of the building and are ideally suited for rapid and low cost construction.
Exterior Facades
Single Skin Panels are trapezoidal ribbed sheets roll formed from thin mill finish or prepainted aluzinc coated steel and aluminum coils and cut-to-length to meet the requirements of a specific building
Sandwich Panels have a polyurethane foam core sandwiched between two single skin metal panels (or an exterior single skin metal panel and an interior aluminum faced laminate).
Single Skin Panels are trapezoidal ribbed sheets roll formed from thin mill finish or prepainted aluzinc coated steel and aluminum coils and cut-to-length to meet the requirements of a specific building
Sandwich Panels have a polyurethane foam core sandwiched between two single skin metal panels (or an exterior single skin metal panel and an interior aluminum faced laminate).
PEB Accessories
Trims and Flashing include eave trim, eave gutters, downspouts, gable trim, curved eave panels, flashing around building accessories, etc. which are produced from prepainted aluzinc coated steel or aluminum sheets that are bent to the required shape.
Building Accessories include sliding doors, rollup doors, personnel doors, fiberglass insulation, sandtrap louvers, windows, ridges ventilators.
Trims and Flashing include eave trim, eave gutters, downspouts, gable trim, curved eave panels, flashing around building accessories, etc. which are produced from prepainted aluzinc coated steel or aluminum sheets that are bent to the required shape.
Building Accessories include sliding doors, rollup doors, personnel doors, fiberglass insulation, sandtrap louvers, windows, ridges ventilators.
Girt Joint
Purlin Butt Joint
Purlin Lap Joint